| dc.description.abstract | Abstract
The objective of Catalytic cracking is a process which breaks down the larger,
heavier, and more complex hydrocarbon molecules into simpler and lighter
molecules by the action of heat and aided by the presence of a catalyst but without
the addition of hydrogen. Heavy Gas Oil (HGO) was chosen as a feedstock to
investigate in by catalytic cracking process on three different of zeolite catalysts
(H-Beta, ZSM-5, and Mordinite) at different reaction temperatures (400, 425, 450
oC) using autoclave batch reactor. The results showed that the catalytic cracking
of HGO over H-Beta, H-ZSM5, and Mordinite catalysts was successfully
catalytically cracked into gases, gasoline and distillate products. Simulated
Distillation (SIMDIST), Gas Chromatograph (GC) and Thermal Gravimetric
Analysis (TGA) techniques were used to analysis the feedstock and reaction
products. Catalytic cracking of HGO was studied increase, the yield of gases;
gasoline and coke are increases, whilst the yields of distillate (207+ oC) are
decreases. Catalytic cracking of HGO in the present of H-ZSM-5 catalyst at 450oC
cracking temperature shows the most interesting results with high Selectivity
toward gasoline range (33.9 wt%), and the reaction products formed during the
catalytic cracking of HGO are formed to be within the carbon distribution ranging
from (C5-C12). It has been found that the cracking temperature has strong influence
on the conversion and product distribution. When H-Beta, H-ZSM5, and Mordinite
catalysts were used as a catalyst, it was noted that as the cracking temperature
increase from 400-450 oC, the liquid yield was decreased from 76 to 69%, 73 to
68%, and 80 to 72% by weight ,respectively. TGA was used in this research to
quantify the coke deposited on the surface of the catalysts tested. The percentage
weight loss of coked catalysts resulting from catalytic cracking of HGO over HBeta,
H-ZSM5, and Mordinite catalysts are 28.6%, 30.6%, and 30% ,respectively | en_US |
